Motor Kit Brushless

X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set

X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set
X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set

X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set   X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set

X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV 5.8G full set. X525 V3 Frame: - Quadrate aluminium pipe, folding type, high rigidity, very easy to install and carry - Specially designed elasticity landing skids - Highly compatible glass fiber centre mount and motor mount with CNC processing - Light weight design brings longer flight time - Wheelbase 525mm, suitable for 4-rotor X and + flying mode - High compatibility, easy to update and FPV - High flexibility and proper stability, easy to do 3D actions and common flight. FS-i6 Transmitter Specifications: - Channels: 6 Channels - Model Type: Glider/Heli/Airplane - RF Range: 2.40-2.48GHz - Bandwidth: 500KHz - Band: 142 - RF Power: Less Than 20dBm - 2.4ghz System: AFHDS 2A and AFHDS - Code Type: GFSK - Sensitivity: 1024 - Low Voltage Warning: less than 4.2V - DSC Port: PS2;Output:PPM - Charger Port: No - ANT length: 26mm2(dual antenna) - Weight:392g - Power: 6V 1.5AA4 - Display mode: Transflective STN positive type, 12864 dot matrix VA7339mm, white backlight. Size: 174x89x190mm - On-line update:yes.

FS-iA6 Receiver Specifications: - Channels: 6 Channels - Model Type: Glider/Heli/Airplane - RF Range: 2.40-2.48GHz - Bandwidth: 500KHz - Band: 142 - RF power:less than 20dBm - RF. Receiver sensitivity:-105dBm - 2.4ghz System: AFHDS 2A - Code Type: GFSK - ANT length: 26mm - Weight:6.4g - Power:4.0-6.5V - Size: 40.4x21.1x7.35mm - i-BUS port: NO - Data Acquisition port:NO.

2212 920KV CW CCW Brushless Motor Specification: - 2212/920KV Brushless Motor - Type: 2212. Outer diameter: 28.0 mm. Height: 24.0 mm (Without Shaft). Fit for DJI F330 F450 F550 X525 Quadcopter Multirotor.

Simonk 30A ESC: Flashed with the famous SimonK OpenSource Firmware for super-fast throttle response, which makes your quad more responsive and "locked in". Suited for quads up to 2.5kg, octos up to 5kg. The ESCs do not overheat, burn or lock out - unline many other ESCs flashed with the SimonK firmware.

The ESC motor leads are reduced to simple bullet connectors, this allows for quick and clean installation inside your multi rotor. Compatible with 2S to 4S battery. RC832 5.8G 32CH Receiver Specification: - Video format supported: NTSC/PAL - Antenna connection: RP-SMA, jack (module side) - Sensitivity:=-90dBm - Power input: 12V - Working current: 200mA max - Antenna impedance: 50? - Antenna gain: 2db - Video impedance: 75? - Video format: NTSC/PAL auto - Dimension: 80x 65 x15mm - Weight: 85g. 7 inch HD LCD TFT Screen Monitor Description: - Screen size: 7 inch - Display format: 16:9 - System: PAL/ NTSC (Auto switch) - Resolution: 800 x 480 - Brightness: 350cd/m2 - Contrast: 350:1 - Red line: Power Input - Yellow and White line: vedio input - Housing Material: ABS - Low power consumption - Power Supply: DC 12V - Operating Temperature 0°C + 80°C - Storage Temperature -10°C + 80°C - Dimensions: 174 x 113 x 19 mm. 5.8G Clover-Leaf Circular Polarized Antenna Specifications: - Gain: 5dBi - Antenna connector: SMA plug (the connector on the antenna side is referred to, please disregard the label on the antenna if there is discrepancy) - Standing wave ratio(SWR). 700TVL Mini CMOS Camera Specifications: - Sensor: 1/4 V8240+FH8510 CMOS - System/Effective pixel: PAL (H X V):512 X 582 - Illumination: 0.2 LUX / F1.2 - Resolution: 700TVL - Scanning Frequency: 50Hzï½60Hz - Gamaï¼s0.45 - Electronic Shutterï¼s1/501/100000s 1/601/100000s - S/Nï¼s>46dB - Video Outputï¼s1.0V p-p - Operation Humidityï¼s-20 º C to 50 º C - Working Humidityï¼sRelative humidity less than 95% - Power consumptionï¼sDC12V.

APM 2.8 Flight Controller Introduction: - This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers. The APM 2.8 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors.

This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with the 3DR uBlox GPS with Compass (see option below), so that the GPS/Compass unit can be mounted further from noise sources than APM itself.

Features : - Arduino Compatible - Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer - Onboard 4 MegaByte Dataflash chip for automatic datalogging - Optional off-board GPS, uBlox LEA-6H module with Compass. One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively. UBLOX NEO-M8N GPS Description: A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy, support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol and mode or more. GPS Chip parameters: - Receiver type 72-channel u-blox M8 engine - GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 - SBAS L1 C/A: WAAS, EGNOS, MSAS - Galileo-ready E1B/C (NEO-M8N) - Nav. Update rate1 Single GNSS: up to 18 HZ - Concurrent GNSS: up to 10 Hz - Position accuracy2 2.0 m CEP - Acquisition2 Cold starts: 26 s - Aided starts: 2 s - Reacquisition: 1.5 s - Sensitivity2 Tracking & Nav: -167 dBm - Cold starts: -148 dBm - Hot starts: -156 dBm - Assistance AssistNow GNSS Online - AssistNow GNSS Offline (up to 35 days)3 - AssistNow Autonomous (up to 6 days) - OMA SUPL & 3GPP compliant - Oscillator TCXO (NEO-M8N/Q), - Crystal (NEO-M8M) - RTC crystal Built-In - Noise figure On-chip LNA (NEO-M8M). Extra LNA for - lowest noise figure (NEO-M8N/Q) - Anti jamming Active CW detection and removal. Extra onboard SAW band pass filter (NEO-M8N/Q) - Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N) - Supported antennas Active and passive - Odometer Travelled distance - Data-logger For position, velocity, and time (NEO-M8N) - Operating temp. 40° C to 85° C - Storage temp. GPS Folding Mount Holder Description - GPS Folding Antenna Mount Holder for Quadcopter Multicopter (YS X4 X6) DJI WOOKONG NAZA-M - Adopt 7075T6 aluminum turning + CNC manufacturing - Glass fiber rods: 14cm. Package Included: - X525 V3 Frame Kit x1 - RHD2212 920KV Brushless motor x4 (CW & CCW) - 1045/1045R Propeller x4PCS (2Pairs) - Brushless Simonk 30A ESC x4 - 1set x FS-i6 2.4G 6ch transmitter& Receiver - 1x 700TVL Mini Camera - 1x 5.8ghz Antenna(TX & RX) - 1x TS5823 5.8G 200MW 32CH Transmitter - 1x FPV RC832 5.8G Receiver - 1x 7 inch HD LCD TFT Screen Monitor - 1x APM2.8 Flight controller - 1x NEO-M8N GPS - 1x GPS Bracket - Not assembled, just a kit. In case the item is defective, please inform us within 14 days upon receipt of item. We will replace a new one. Return items should include the original packaging and accessories.

We do not accept any used item return. Hobbywing QUICRUN WP-CRAWLER 1080 Brushed 80A ESC Program Card XT60 B. Eagle A3 Super3 A3S3 6 Axis plane Gyro Flight Controller Stabilizer full Set A. HWA30203401 Hobbywing Platinum Pro 120A V4 120 Amp ESC A.

2Pack 70mm Duct Fan 3000KV Brushless Outrunner Motor for EDF RC Jet Plane 3M. 4x 2212 920KV CW CCW Brushless Motor for DJI Phantom F330 F450 F550 X525 3M.

4x 20A Mini Simonk ESC OTPO (2-4S) for FPV Multirotor C250 C210 ZMR180. QJ 29CC Rear Exhaust Marine Engine For RC Boat. 30.5CC Side Exhaust Marine Engine for RC boat. 7 MP5 Player GPS Bluetooth Car Stereo Android 7.1 Radio 2 DIN Wifi +Rear Camera.

LEOPARD LBP3650 4550KV motor Mystery 100A ESC water cooling jacket LB36WCJ-40MM. The item "X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set" is in sale since Friday, January 18, 2019. This item is in the category "Toys & Games\Radio Control & RC Toys\RC Model Vehicles & Kits\Quadcopters & Multicopters". The seller is "top_rc2015" and is located in Hong Kong.

This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Type: X525 V3
  • Fuel Source: Electric
  • Year: 2016
  • Country of Manufacture: China
  • For Vehicle Type: FPV Quadcopter
  • EAN: 0604776430124
  • format: soldeasy
  • Brand: TOP RC
  • MPN: Does not apply


X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set   X525 4-axis Frame Kit 2212 920kv Motor M-30A FS-IS I6 Radio FPV full set